LawtonRecruiter Since 2001
the smart solution for Lawton jobs

Electrical Engineer

Company: Army Installation Management Command
Location: Fort Sill
Posted on: November 20, 2022

Job Description:

Summary This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of the DoD Workforce to recruit and appoint qualified candidates to positions in the competitive service. About the Position: The incumbent will serve as an Electrical Engineer for the Directorate of Public Works in Fort Sill, Oklahoma. Responsibilities Serve as an electrical engineering professional consultant in the field of energy management involving the use of automated techniques to monitor and control electrical, mechanical, and pneumatic equipment. Review all proposed construction and maintenance projects for the Energy Savings Performance Contract (ESPC), Utility Energy Savings Contract (UESC) application possibilities, and ESPC/UESC expansion programs as appropriate. Conduct or direct fact finding surveys of high-energy use systems and equipment to compile data regarding efficiency levels. Attend site visits to assist with problems encountered during construction. Analyze equipment and systems to coordinate and schedule operations to optimize efficiency. Requirements Conditions of Employment Qualifications ***Applications will be reviewed and referred for selection at periodic cut-off dates starting on 21st November 2022 and every other week thereafter; and again at closing date on 30th December 2022. *** Who May Apply: US Citizens In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for Electrical Engineer: (NOTE: You MUST attach a copy of your transcripts.) A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: In order to qualify at the GS-11 Level: Specialized Experience: One year of specialized experience which includes 1) Conduct fact finding surveys of high-energy use systems and equipment to compile data on efficiency levels; 2) Design control systems to maximize performance; and 3) Respond to manufacturers' inquiries regarding quality of new equipment to ensure safety. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-09). Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: engineering. (NOTE: You MUST attach a copy of your transcripts.) OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages. In order to qualify at the GS-12 Level: Specialized Experience: One year of specialized experience which includes 1) Provide electrical engineering support regarding the planning and designing of work for infrastructure, facility renovation, and new construction projects; 2) Consult with energy companies on the cost, availability, and adequacy of existing electrical service; 3) Inspect electrical equipment to determine physical condition and operating efficiency in order to recommend courses of actions to correct identified deficiencies; and 4) Coordinate with contractors to manage energy and utility contracts ensuring that projects are in compliance with regulations and policies. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11). Education FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html Additional Information Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration. You will be required to provide proof of U.S. Citizenship. Two year trial/probationary period may be required. Direct Deposit of Pay is required. This position requires you to submit a Public Financial Disclosure Report (OGE 278) or a Confidential Financial Disclosure Report (OGE450) upon entry, and annually thereafter. Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees. If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet. This is a Career Program (CP) 18 - Engineers and Scientists position. Multiple positions may be filled from this announcement. Salary includes applicable locality pay or Local Market Supplement. When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit https://www.dfas.mil/civilianemployees/civrelo/Civilian-Moving-Expenses-Tax-Deduction/ for more information. If you are unable to apply online or need to fax a document you do not have in electronic form, view the following link for information regarding an Alternate Application. Permanent Change of Station (PCS) allowances may be authorized, subject to the provisions of the Joint Travel Regulations and an agency determination that a PCS move is in the Government Interest. Due to COVID-19, the agency is currently in an expanded telework posture. If selected, you may be expected to temporarily telework, even if your home is located outside the local commuting area. Once employees are permitted to return to the office, you will be expected to report to the duty station listed on this announcement within a designated time frame identified by the organization. At that time, you may be eligible to request to continue to telework one or more days a pay period depending upon the terms of the agency's telework policy. Information may be requested regarding the vaccination status of selectees for the purposes of implementing workplace safety protocols. For more information, visit https://www.saferfederalworkforce.gov/faq/vaccinations/.

Keywords: Army Installation Management Command, Lawton , Electrical Engineer, Other , Fort Sill, Oklahoma

Click here to apply!

Didn't find what you're looking for? Search again!

I'm looking for
in category
within


Log In or Create An Account

Get the latest Oklahoma jobs by following @recnetOK on Twitter!

Lawton RSS job feeds